在線
客服
在線客服服務時間：9:00-19:00
QQ客服：
旺旺客服：
客服
熱線
18623896844
13264445812
18612707474
7*14小時客服服務熱線
添加
微信
風清揚官方微信
打賞
站長
感恩支持
尼康 Nikon COOLPIX P80固件下載 輕便型數碼照相機COOLPIX P80 win版 os版 升級 刷機Ver.1.1F-P80-V11M.sit.hqx(約3.37 MB) 新版本 windows MacOS 免費
下載用于尼康產品的軟件。若要查看說明、注意事項以及下載和安裝指示說明,請單擊“查看下載頁面”。
COOLPIX P80 固件
選擇您的操作系統。
- Windows
- Mac OS
該軟件更新程序針對用戶所有的以上產品（“相關產品”），并且僅在用戶接受了下列協議時提供。選擇“接受”并單擊“下載”，即表示您接受該協議的條款和條件。開始下載之前請確保您已理解該協議條款。
About this firmware update
This service provides the software for upgrading the COOLPIX P80 firmware to ver. 1.1.
?
The following improvements have been made in version 1.1.
- When shooting with the Vibration reduction item in the setup menu set to On, vibration reduction did not always function in the following situations.? This issue has now been resolved
When the camera was turned on or when it recovered after being set to standby mode (activated by the auto off function), with the electronic viewfinder display enabeled by pressing the monitor button
When the camera was turned on, or with recovery from standby mode (actiavted by the auto off function) with the camera connected to a television or other video device via the supplied audio/video cable (EG-CP14)
- When shooting with the Distortion control option set to On, exessive correction was sometimes applied. This issue has now been resolved.
?
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your P80, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1. Rotate the cameras mode dial to SET UP and turn on the camera.
2. The setup menu will be displayed in the monitor.? Select Firmware Version from the setup menu.
3. The cameras firmware version will be displayed.?
4. Turn the camera off.
?
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download and expand the firmware files
2. Format an approved SD card in the camera
3. Connect Camera to computer (in MSC USB mode) or use a SD Card Reader
4. Copy to the top level of the card the downloaded "firmware" folder (which contains the "firmware.bin" file)
5. Disconnect camera from computer
6. Turn the camera on press the Menu button and select "SET UP". Rotate the multi selector to highlight Firmware version, and press OK button.
7. Follow the camera's on-screen menus
8. At completion of upgrade restart camera
9. Re-format Card
For detailed instructions on how to install this firmware update click here
System requirements
System requirements |
5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
Download file |
F-P80-V11W.exe (2.3MB) |
About this firmware update
This service provides the software for upgrading the COOLPIX P80 firmware to ver. 1.1.
The following improvements have been made in version 1.1.
- When shooting with the Vibration reduction item in the setup menu set to On, vibration reduction did not always function in the following situations. This issue has now been resolved
When the camera was turned on or when it recovered after being set to standby mode (activated by the auto off function), with the electronic viewfinder display enamelled by pressing the monitor button
When the camera was turned on, or with recovery from standby mode (activated by the auto off function) with the camera connected to a television or other video device via the supplied audio/video cable (EG-CP14)
- When shooting with the Distortion control option set to On, excessive correction was sometimes applied. This issue has now been resolved.
How to confirm your cameras current firmware version
If the latest firmware versions are already installed on your P80, you need not proceed with download or installation of this Firmware Upgrade. Current firmware versions can be verified from the Firmware version item in the camera's setup menu.
1. Rotate the cameras mode dial to SET UP and turn on the camera.
2. The setup menu will be displayed in the monitor. Select Firmware Version from the setup menu.
3. The cameras firmware version will be displayed.
4. Turn the camera off.
Quick guide for download and installing this firmware update
Power the camera from AC adapter unit or use a fully charged battery.
1. Download and expand the firmware files
2. Format an approved SD card in the camera
3. Connect Camera to computer (in MSC USB mode) or use a SD Card Reader
4. Copy to the top level of the card the downloaded "firmware" folder (which contains the "firmware.bin" file)
5. Disconnect camera from computer
6. Turn the camera on press the Menu button and select "SET UP". Rotate the multi selector to highlight Firmware version, and press OK button.
7. Follow the camera's on-screen menus
8. At completion of upgrade restart camera
9. Re-format Card
For detailed instructions on how to install this firmware update click here
System requirements
System requirements |
Mac OS 9.0.4-9.2.2 Mac OSX 10.1.5 - 10.5.2 Power PC G3 or better 5MB or more free hard-disk space. 32MB or more free RAM. Built-in USB port. |
Download file |
F-P80-V11M.sit.hqx (3.4MB) |
PDF文件可使用免費的Adobe? Reader?軟件進行查看。
下載Adobe? Reader?。