在線
客服
在線客服服務時間：9:00-19:00
QQ客服：
旺旺客服：
客服
熱線
18623896844
13264445812
18612707474
7*14小時客服服務熱線
添加
微信
風清揚官方微信
打賞
站長
感恩支持
尼康 Nikon COOLPIX S4000固件下載 輕便型數碼照相機COOLPIX S4000 win版 os版 升級 刷機Ver.1.3F-S4000-V13W.exe(約6.16 MB) 新版本 windows MacOS 免費
下載用于尼康產品的軟件。若要查看說明、注意事項以及下載和安裝指示說明,請單擊“查看下載頁面”。
COOLPIX S4000 固件
選擇您的操作系統。
- Windows
- Mac OS
該軟件更新程序針對用戶所有的以上產品（“相關產品”），并且僅在用戶接受了下列協議時提供。選擇“接受”并單擊“下載”，即表示您接受該協議的條款和條件。開始下載之前請確保您已理解該協議條款。
This?software?is for upgrading the COOLPIX?S4000 firmware from v1.0, v1.1, and v1.2?to v1.3. Verify your camera’s firmware version using the instructions below. If this latest version is already installed in your camera, you need not update the firmware.
Be sure that you have read and understand the terms of the license agreement before initiating download of this software from the links at the bottom of this page.
Modifications enabled in this version
- When the Charging AC Adapter EH-68P and USB Cable UC-E6 were connected to the camera to charge the Rechargeable Li-ion Battery EN-EL10 with the EN-EL10 at or very near full exhaustion, the battery sometimes could not be charged.?This issue has been resolved.?
How to?verify your cameras current firmware version
If the latest firmware version is already installed on your?S4000 you need not proceed with download or installation of this Firmware Upgrade. The current firmware version can be verified from the Firmware version item in the camera's setup menu.
- Turn on the camera.
- Tap MENU in the main display and then tap?
?(setup).? - Tap Firmware version in the?(setup) menu.
- The camera's firmware version will be displayed.??
- Turn off the camera.
Quick Install Guide
This is the quick install guide, for detailed instructions click the link below.
Power the camera from AC adapter unit or use a fully charged battery.
- Create a new folder with an appropriate name on your computer's hard drive.
- Download the Windows (.EXE)?or Mac (.DMG) file from the links at the bottom of this page to the folder created in step 1.
- Run the downloaded file to create a folder called S4000Update which contains the firmware folder.
- Use a card reader or similar device to copy the?firmware folder to the root directory of a formatted memory card.???
- Insert the memory card into the camera's memory card slot and turn on the camera.
- Tap Firmware version in the?(setup) menu and follow instructions displayed to upgrade the firmware.
- After the upgrade is complete, turn the camera off and remove the memory card.
- Access the Firmware version item in the camera's setup menu to confirm that the firmware has been upgraded.
|
Windows: Detailed Firmware Upgrade instructions |
Mac: Detailed Firmware Upgrade instructions |
System Requirements
WindowsOperating System |
Mac OS XOperating System |
Download file: F-S4000-V13W.exe (6.16 MB) |
Download file: F-S4000-V13M.dmg (8.07 MB) |
PDF文件可使用免費的Adobe? Reader?軟件進行查看。
下載Adobe? Reader?。